Moon Mk11 Prototype 1

 

The Mk11 is a pretty exciting introduction for Moon Knives, being the first full size framelock I've had in my lineup since the Mk12.  In a sense, it's a modified Mk10, but without any scales and an IO-Stop on the inside, borrowed from my Mk8/9 models.  The lack of scales accentuates the deceptively complex milling on the knife, allowing for only one screw, the pivot screw, to show on the non-locking side of the knife, and only four showing on the locking side, three of which are on the pocket clip.  The Mk11 also features a full thickness locking bar, which is massive, nearly .156 in thickness for exceptional rigidity.  Additionally, the Mk11 is available for the first time ever with a full Ti build, meaning there is an available option for billet titanium on the spacer and clip.  With these parts made of titanium, the entire knife feels like one solid piece of billet Ti, and looks like an integral framelock.  

As configured: This Mk11 is the original prototype, serial number 1, and it's marked as such inside the frame.  It features a satin CPM-20CV blade with a semi-polished crowned spine. The frame is satin  finished with orange peel blue anodized chamfers and satin edges.  The spacer and clip are both billet Ti and match the finish on the frame.  

 
 
$1,000.00
 
# In Stock
1
 
*